Parking some material for the KB here until I get around to it
Posted: 06 Jan 2022 12:22
Courtesy of Jane:
FH Command Line Parameters
Usage
fh [/INI:<inifile-name>] [<file-name>]
<file-name> can be a GEDCOM file to open
Some Inifile settings (i.e. Window, Record and SuppressWarningsOnLoad) have no effect unless a command line GEDCOM file is specified to open - see 'Format of Startup Inifiles' below.
Format of Startup Inifiles
A startup INI file has the following format:
<record-id> must be the record id of an Individual or Family record to show at startup, and must be prefixed with an 'I' for Individual records or an 'F' for family records. The 'Window' is the startup window.
<diagram-type> is ignored unless Window=DiagramWin, in which case it is required. Specifies the name of a standard or custom diagram type, prefixed with “C-” if it is a custom diagram and “S-” if it is a standard diagram. For example: “DiagramType=C-Ancestors - 4 Gens” (without the quotes).
FH Command Line Parameters
Usage
fh [/INI:<inifile-name>] [<file-name>]
<file-name> can be a GEDCOM file to open
Some Inifile settings (i.e. Window, Record and SuppressWarningsOnLoad) have no effect unless a command line GEDCOM file is specified to open - see 'Format of Startup Inifiles' below.
Format of Startup Inifiles
A startup INI file has the following format:
Code: Select all
[Startup]
Window=FocusWin [or RecordWin or DiagramWin]
DiagramType=<diagram-type>
Record=<record-id>
<diagram-type> is ignored unless Window=DiagramWin, in which case it is required. Specifies the name of a standard or custom diagram type, prefixed with “C-” if it is a custom diagram and “S-” if it is a standard diagram. For example: “DiagramType=C-Ancestors - 4 Gens” (without the quotes).