Re: AS v7.3 available to test
Posted: 08 Feb 2022 06:36
In the Reference ID box (Ref Id).In my template there's a place for Reference information - WHERE in AS do I enter that?
Family Historian User Group
Helping Family Historian users since 2002
https://fhug.org.uk/forum/
AS v7.3 available to test
Page 2 of 2
Re: AS v7.3 available to test
Posted: 08 Feb 2022 09:20
Hi Nick,
No Major problems so far (7.3.1).
One minor one. When entering a baptism.
Finish entering a baptism and save, the retain data window pops up, click cancel and the data is cleared from AS. But the Ref ID remains populated.
[EDIT] The Other Info field also remains populated.
No Major problems so far (7.3.1).
One minor one. When entering a baptism.
Finish entering a baptism and save, the retain data window pops up, click cancel and the data is cleared from AS. But the Ref ID remains populated.
[EDIT] The Other Info field also remains populated.
Re: AS v7.3 available to test
Posted: 08 Feb 2022 10:17
I agree. I thought it was only me and I have changed something in the options.
Even though Ref Id & Other Info are unticked, the fields are being populated automatically for the next entry. This even happens when changing to a different type - i.e. Baptism to Marriage.
Even though Ref Id & Other Info are unticked, the fields are being populated automatically for the next entry. This even happens when changing to a different type - i.e. Baptism to Marriage.
Re: AS v7.3 available to test
Posted: 08 Feb 2022 12:26
OK I'll have a look at this. I did make a change in this area to fix an issue that had been reported, but it sounds like it may have had an unintended consequence!
Thanks
Nick
Thanks
Nick
Re: AS v7.3 available to test
Posted: 08 Feb 2022 15:06
Can anyone help with this?fhtess65 wrote: ↑08 Feb 2022 05:08Ok - THIS is where I get stuck. In my template there's a place for Reference information - WHERE in AS do I enter that? I've filled out all the other necessary information, but can't see a corresponding box for Reference, other than possibly the Other Info field on the Further Info tab, for, in this case a baptism. Again, I'm sure it's blindingly obvious and I'm just missing it after a full day of work. Thanks again to anyone who can explain to me where I've gone wrong...WheretoputsourceinfoinASTemplate.jpg
Re: AS v7.3 available to test
Posted: 08 Feb 2022 15:13
As Nick said, it's in the Reference ID box (Ref Id). What he didn't mention is that in the case of a baptism, which you are looking at, the Ref ID box is on the Further Info tab, just above the Other Info box you mentioned.
Re: AS v7.3 available to test
Posted: 08 Feb 2022 15:27
Yes and it was on the screenshot you included!LornaCraig wrote: ↑08 Feb 2022 15:13As Nick said, it's in the Reference ID box (Ref Id). What he didn't mention is that in the case of a baptism, which you are looking at, the Ref ID box is on the Further Info tab, just above the Other Info box you mentioned.
Re: AS v7.3 available to test
Posted: 08 Feb 2022 15:39
Thanks, Nick and Lorna - and if I missed Nick's first response, I apologize - I was sure I'd looked at every post, but it's early over here in Canada... I figured that had to be it, but wanted to be sure before I started adding a whole lot of baptisms.NickWalker wrote: ↑08 Feb 2022 15:27Yes and it was on the screenshot you included!LornaCraig wrote: ↑08 Feb 2022 15:13As Nick said, it's in the Reference ID box (Ref Id). What he didn't mention is that in the case of a baptism, which you are looking at, the Ref ID box is on the Further Info tab, just above the Other Info box you mentioned.
Thanks again for all your help!
Re: AS v7.3 available to test
Posted: 08 Feb 2022 19:15
I've now released test version 7.3.2 having hopefully fixed the issue with retention of the reference id and other information text boxes reported by John and Richard earlier.
Ancestral Sources 64 Bit v7.3.2
Ancestral Sources 32 Bit v7.3.2
Ancestral Sources 64 Bit v7.3.2
Ancestral Sources 32 Bit v7.3.2
Re: AS v7.3 available to test
Posted: 09 Feb 2022 00:30
Nick,
I tried entering several censuses and marriages and all looked good to me.
Thanks for the hard work and the new version.
Bill
I tried entering several censuses and marriages and all looked good to me.
Thanks for the hard work and the new version.
Bill
Re: AS v7.3 available to test
Posted: 09 Feb 2022 18:54
Thanks Bill - if any one else has used it enough times to be reasonably confident it is working OK please would you mind posting here. I'm keen to release this properly ASAP.
Re: AS v7.3 available to test
Posted: 09 Feb 2022 19:54
Nick
The change seems to have fixed the problem. I have tried Baptisms, Marriages, Burials & Census with no problems.
Thank you
Richard
The change seems to have fixed the problem. I have tried Baptisms, Marriages, Burials & Census with no problems.
Thank you
Richard
Re: AS v7.3 available to test
Posted: 09 Feb 2022 21:19
Nick
I literally have had no time to do anything till late this evening. But I've just managed to try my first Census on any of the versions. I'm now on (7.3.2)
I'm trying to recall, but I can't remember if that "Default" box appeared in the old version.
I literally have had no time to do anything till late this evening. But I've just managed to try my first Census on any of the versions. I'm now on (7.3.2)
- AS.jpg (71.42 KiB) Viewed 2336 times
Re: AS v7.3 available to test
Posted: 09 Feb 2022 21:27
I have done a few census entries on the latest version, but not had a chance to test any others yet
Re: AS v7.3 available to test
Posted: 09 Feb 2022 22:11
Thanks Colin - that's very well spotted. You presumably have selected the option to only show rich text templates and have also customised the default template and chosen the option to not show the built in templates if there is a custom one with the same name. The routine that counts how many templates would be shown before deciding whether to show the pop-up menu wasn't taking into account the option to hide built in templates. That will be fixed in the next version.
Re: AS v7.3 available to test
Posted: 10 Feb 2022 10:09
Nick
That is how I've set it up. Thanks
That is how I've set it up. Thanks
Re: AS v7.3 available to test
Posted: 11 Feb 2022 14:53
I've managed to input about a dozen census entries for different countries and not spotted any issues. Haven't had time to look at others.
Re: AS v7.3 available to test
Posted: 16 Feb 2022 16:25
No problems at all in entering a variety of 1921 censuses with 7.3.3. All seems to work extremely well.
One issue that I've noticed before (not a new one I think) is that after accepting the AS message "The GEDCOM family history file has been changed ...", AS unexpectedly loses the focus and FH comes to the front. Is there a way of restoring the AS window automatically at this point?
As a side question, do you have a preferred place, Nick, where you'd like users to let you know of bugs and suggestions? I couldn't see anything in the documentation. Is there an issues register that users could contribute to, on Github or somewhere?
One issue that I've noticed before (not a new one I think) is that after accepting the AS message "The GEDCOM family history file has been changed ...", AS unexpectedly loses the focus and FH comes to the front. Is there a way of restoring the AS window automatically at this point?
As a side question, do you have a preferred place, Nick, where you'd like users to let you know of bugs and suggestions? I couldn't see anything in the documentation. Is there an issues register that users could contribute to, on Github or somewhere?
Re: AS v7.3 available to test
Posted: 20 Feb 2022 20:13
Hi Michael
The AS Help on the Introduction/Read this First page does suggest you should email me if you have any questions and suggestions but also refers to this forum as a good place to go. There are also links to email me and access the forum from the Help menu.
I'll look into the other issue and see if I can find a solution to it.
Best wishes
Nick
The AS Help on the Introduction/Read this First page does suggest you should email me if you have any questions and suggestions but also refers to this forum as a good place to go. There are also links to email me and access the forum from the Help menu.
I'll look into the other issue and see if I can find a solution to it.
Best wishes
Nick
Re: AS v7.3 available to test
Posted: 23 Feb 2022 19:19
Hi Mike. In case you haven't spotted it, in the recent update to Family Historian (v7.0.10), citation shared/linked notes are now shown under the notes tab. Hopefully in future it may be possible to at least customise the citation tab to show a linked/shared note, but for now it's good that they are at least shown on the Notes tab. It was great to have Calico respond to this request so quickly.tatewise wrote: ↑06 Feb 2022 11:28Nick, the AS7.2.7 to FH7.0.9 tables not moving over (20278) found a problem with Method 2 settings.
It seems that the default AS Tools > Options... setting for all Method 2 data is to save Source Text 'In shared note'.
The user may not notice that and so does not change it to 'In local citation text'.
In FH v7 the new Citation Window does not show Citation-specific linked shared Note records in the Notes tab.
The Citation Window can be customised on the Citation tab to show a linked Note using the SOUR.NOTE data ref.
However, without that, as illustrated in the thread above, for a relatively new user the linked Note appears to go missing.
Strangely, Citation Window Source Record linked shared Note records are shown in the Notes tab.
As you seem to have a closer relationship with CP than most, would a request to show Citation-specific linked Notes in the Citation Window on its Notes tab come best from you?
Re: AS v7.3 available to test
Posted: 23 Feb 2022 23:07
Although it cannot show the shared Note record text, the Citation Window can be customized on its Citation pane to show the link to the Note record by using the Data Reference SOUR.NOTE
That allows a Note record to be selected, cleared, and opened via its right-hand cog menu.
That allows a Note record to be selected, cleared, and opened via its right-hand cog menu.