* One page PDF output
-
Nick-V
- Superstar
- Posts: 268
- Joined: 18 Nov 2009 17:50
- Family Historian: V6
- Location: London, England
One page PDF output
In Family Tree Maker it is possible to export a chart to a one page PDF. In FH this only occurs when the output is relatively small otherwise it becomes a multi-page PDF. A multipage PDF makes navigating a chart more difficult and less pleasant to read. Perhaps FTM's PDF handler ir more capable that FH's or there are alternative solutions.
Last edited by Nick-V on 08 Apr 2015 11:57, edited 1 time in total.
-
Jane
- Site Admin
- Posts: 8442
- Joined: 01 Nov 2002 15:00
- Family Historian: V7
- Location: Somerset, England
- Contact:
Re: One page PDF output
It depends on your zoom settings, font sizes and box spacing, the maximum size for an FH PDF is 120" x 120", so by making the zoom smaller you can get more onto a page. I presume you are using the Save As PDF option from the diagram menu and not trying to Print to PDF?
Jane
My Family History : My Photography "Knowledge is knowing that a tomato is a fruit. Wisdom is not putting it in a fruit salad."
My Family History : My Photography "Knowledge is knowing that a tomato is a fruit. Wisdom is not putting it in a fruit salad."
-
Nick-V
- Superstar
- Posts: 268
- Joined: 18 Nov 2009 17:50
- Family Historian: V6
- Location: London, England
Re: One page PDF output
Of course Jane you are right...yes using Save Diagram As...PDF...I've reduce the zoom to 25% and it fits...many thanks...
-
jimlad68
- Megastar
- Posts: 911
- Joined: 18 May 2014 21:01
- Family Historian: V7
- Location: Sheffield, Yorkshire, UK (but from Lancashire)
- Contact:
Re: One page PDF output
there have been a few posts on this including
PDF Print Settings For Diagrams (12465)
PDF Print Settings For Diagrams (12465)
Jim Orrell - researching: see - but probably out of date https://gw.geneanet.org/jimlad68